HOME | | | ABOUT US | | | PRODUCTS | | | PRODUCT FINDER | | | MEDIA | | | CONTACT US |
Connectors |
1.85mm Connector |
2.4mm Connector |
2.92mm Connector |
SMA Connector |
SSMA Connector |
TNCA Connector |
N Connector |
Adapters |
Microwave Components |
Cable Assembly |
Tools & Accessories |
The 1.85mm connector is 50ohm precision connector developed in the mid-1980s by Hewlett Packard. Perform mode free to 65GHz. The outer conductor measures 1.85mm and the robust wall of the connector body is designed to engage before the center conductor, assuring a rugged, repeatable mating interface. |
|||||
The interface is air dielectric with the contact supported by a short dielectric bead. |
|||||
Features & Benefits | |||||
■ Excellent performance up to 65GHz | |||||
■ Rugged construction for reliability | |||||
■ Mechanically compatible with 2.4mm connector series | |||||
Products Links | |||||
All 1.85mm Connector Products 1.85mm Connector Catalog Online |
Standard Specifications | ||||
Electrical | ||||
Impedance | 50Ω | |||
Frequency Range | DC -65 GHz | |||
VSWR | 1.25:1 | |||
Dielectric withstanding voltage | 500V | |||
Contact Resistance | center contact: ≤ 3 mΩ; outer contact: ≤ 2.5 mΩ | |||
Insulation resistance | ≥3*1000 mΩ | |||
Mechanical | ||||
Center Contact Material | Copper Beryllium Alloy, Gold-plated | |||
Body Material | Stainless steel, Passivated | |||
Insulator Material | PEI, PTFE | |||
Durability(matings) | ≥500 | |||
Environmental | ||||
Temperature Range | -55°C to +165°C | |||
Vibration | MIL-STD-202, Method 204, Condition D | |||
Corrosion | Saltspray test acc.to MIL-STD-202, Method 101, Condition B | |||
Thermal shock | MIL-STD-202, Method 107,Condition B | |||
Notes: These characteristics are typical but may not apply to all connectors, some special connectors may differs from the above mentioned data. | ||||
Home | About us | Disclaimer | Privacy Policy | Contact us | 2012-2013 © Connov Microwave Inc. |